Stairs lighting controller 11-20 steps.

Price (cost) - 180$ or 140€
Payment: PayPal or bank account

Questions, prices, orders: biuro@nowoster.pl


 

 

Stair lighting controller - the steps of the world's most powerful algorithmic and highnumber of features. Switching on and off, jumping and smooth mesh LED and LED strips. Regulations speed control blur, uneven adjustment (non-linearity) on and off. The restlight and solid. Timer LED lighting and many other useful features.

Stair lighting controller of the largest hardware and algorithmic capabilities on the market. Probably the best on the market for LED driver staircase.


 

Driver impressive stair lighting. Universal Driver and the number of steps, stairs, lighting points, etc. selected in the driver between 11 and 20 (you do not have to wonder exactly how many degrees will eventually be and whether it will be 14, 15 or maybe 16 is selected in a simple way in the driver).

 

 

Universal version. The driver can choose optimal algorithms and effects for buttons and the detectors (sensors).

 

 

 

 

A person from bottom to top: 

 

A person from top to bottom:

 

Two people from the opposite direction:

 

Two people from the opposite direction, returning a person, two people one by one:

 

 

 

DESCRIPTION OF THE DRIVER:

The controller is designed for strips and LED bulbs 12V. Control is achieved by two motion detectors (opto barrier, infrared, etc.) Each detector is responsible for lighting and extinguishing the up or down. PG detector alarm will turn lighting up the channels at preset potentiometer P3. Then, all channels will be lit for the time set potentiometer P7 or PD detector is activated. After the channels will fade in the same order as the rate of lit set to P4. Activation of detector PD (bottom) lighting will turn downward channels, etc. The detector activation PG (or the time set potentiometer P7) channels will fire downwards.


Contacts PD and PG in the picture is a motion detector relay contacts.

Power controller 12V DC. The same voltage as the power supply LED strips. Load each channel to 1A. What does an installed capacity of max. 12W per channel.

 

 

 

 

algorithms - effects:

1 the ignition keys you press. Do not press the button going down the stairs.
Quenching in the same direction as the ignition. Fire on time
set to P7.

2 the buttons lighting up when pressed.
Option fire while descending at once by pressing and
hold for 2 seconds. In order to quickly extinguish the option to work longer need to
All channels will light up if less time as 1s
the controller determines a person from the opposite direction.

3 as one, but fading out of order but all at once the time set for P7.

4 the detector, there is no option in the opposite direction. Fire on the other hand, as a person descends the stairs

5 as 4, but before all catch fire and people will come from the opposite direction it will result in the opposite direction and will meet along the way results

6 as 4, but fading out of order but all at once

7 the effect of lift (carriage)

8 the effect of the waterfall (cascade)

9 turn off the lights random effect

PD - down button (bottom detector relay)
PG - the top (upper detector relay)
PS - the light is constant
PB - lock button.


P1 - change the brightness of the rest two extreme or all channels periodically. The change takes place by pressing and letting go of the button. In addition, a permanent change in brightness and maximum results. Then press and hold the PS and then click P1.

Changing the number of channels. P2 Press and hold for 5 seconds until you have glowing extreme channels. I still keep P2 and P1 click and change the number of degrees. There will always be a shining extreme and thus will be seen in the number of channels between 11 and 20 set. Release the P2 and exit channel mode.

Changing the algorithm. There are 6 Press P1 and keep 5 seconds.
I still keep P1 and P2 click. They will appear lit channels 1 to 6
Where such an algorithm lit 3 3 and 6 are lit algorithm 6
Release the P1 exit the mode.

And so algorithms 1,2 and 3 is the optimal set. A algorithms 4, 5 and 6 are optimal detector.

PB - namely blocking input masking effects and glare at rest. Short circuit causes the gain at 0% output. The activation of PS and PB PS has a higher priority and will be continuously lit.

P3 - lighting speed potentiometer

P4 - extinction rates

P5 - inequality of (non-linear) rise and

P6-jog mode (right end position) or liquid with faded. Since about 90% to 0% is a liquid with adjustable blur. Above 90% is already jumping mode.

P7 - burn time for all channels. How to ignite all the channels that will be enough time to shine if it will not work a second detector with the descent mode detector. This time is also protected in the detector mode. Modes, the buttons before time is suppressed.

P8 - time timer mode input light is constant. If you press and release the PS button briefly (for three seconds) the timer mode. If you press and hold min. 3 seconds it goes to trim non-stop. After 3 seconds, keep pressing the PS is subdued first channel. This is information that is already non-stop mode (no time). You can already release the PS and the steady light of all channels non-stop (channel 1 is no longer dimmed and lights normally).

During steady illumination mode (whether the timer is non-stop) to re-click the PS mode with light. The left position of the minimum time (about 5 minutes), the right maximum (about 3 hours and 20 minutes). Symmetry of the time about 60 minutes.



Attention.
Any change to the potentiometers and the buttons to reset the controller power supply. So we change something such as speed, etc. is reset the power to the new settings are pre-programmed processor. The operation of this controller is set up and running again, and therefore are only set when starting voltage. This applies not only change the brightness of rest or constant light. There's no need to reset. But it does not hurt to reset.

 

SUMMARY:

- Selectable number of steps, stairs, lighting points, etc. between 11 and 20

- Selection algorithm - effects actions 1 of 9 (3-optimal algorithms buttons and 6 algorithms optimal detector and buttons)

- Action abrupt or smooth (mild).

- Input the up and down motion detectors (IR opto barrier)

- Speed ​​control lighting

- Separate adjustment of the speed of light off

- Regulation of inequality (non-linear) on and off lights

- Regulation of smooth blur effect

- Adjustment of light 'all the channels as I lit

- The input light is constant PS all channels with additional time (timer)

- PB glare blocking input (eg from the unit or the central civil twilight)

- Adjustable angle rest in 0-30% of electric power two extreme or all channels

- Control of brightness and illumination effects max standing in the range of 50-100% of electric power

- Adjust the time as a function of time timer light is constant

- Size (7.5 cm by 10.5 cm by 2.5 cm). The advantage is that it is relatively small and can fit in a cabinet, box, etc. The standard controller is sold without case because the assembly and this is usually in a closet or collecting box next to the power supply, etc. However, the option is sold version with additional housing .

- The supply voltage 8-15V DC. Typically 12V DC

- Current consumption of 20mA driver itself

- Power consumption by the same driver 0,25 W

- Load capacity up to 1A per channel

- Good value for options

- LEDs, LED strips, LED bulbs can be connected to the controller even ten meters long cables

- The controller can be connected to the same LEDs (with resistors), LED strips, LED modules, LED strips, LED light bulbs, etc.

- The controller is sold as pictured. The buttons, sensors, power supply, LED light source must be provided with its own
- Very high efficiency operation